Skip to main content

Reignmac RMM 633 kehlemaskine høvlebredde/højde 330×230 mm

Video fabrik

Kontakt for mere information

REIGNMAC RMM 433 – 533 – 633

Technical parameter Product characterist Details

 Specification & type RMM633 RMM533 RMM433
Working Width (mm) Min. 50 50 50
 Max. 330 330 330
Working Thickness (mm) Min. 8 8 8
 Max. 230 230 230
Number of spindles 6 5 4
Spindle Speed (r/min) 5000/6000 5000/6000 5000/6000
Cutting circle(max~min)(mm) First Bottom Spindle Φ110-Φ145 Φ110-Φ145 Φ110-Φ145
Right Side Spindle Φ110-Φ200 Φ110-Φ200 Φ110-Φ200
Left Side Spindle Φ110-Φ200 Φ110-Φ200 Φ110-Φ200
First Top Spindle Φ110-Φ200 Φ110-Φ200 Φ110-Φ200
Second Top Spindle Φ110-Φ200 —– —–
Second Bottom Spindle Φ110-Φ200 Φ110~Φ200 —–
Spindle diameter (mm) Φ50 Φ50 Φ50
Basic motor power (kW)  First Bottom Spindle 11KW/15HP 11KW/15HP 11KW/15HP
 Right Side Spindle 7.5KW/10HP 7.5KW/10HP 7.5KW/10HP
 Left Side Spindle 7.5KW/10HP 7.5KW/10HP 7.5KW/10HP
 First Top Spindle 11KW/15HP 11KW/15HP 11KW/15HP
 Second Top Spindle 11KW/15HP —– —–
 Second Bottom Spindle 11KW/15HP 11KW/15HP —–
 Feed 7.5KW/10HP 5.5KW/7.5HP 5.5KW/7.5HP
 Feed beam rise & fall 1.1KW/2HP 1.1KW/2HP 1.1KW/2HP
Total motor power(KW) 67.6KW/91.5HP 54.6KW/74HP 43.6KW/59HP
Feed speed (m/min) (Inverter for feed )  5-25  5-25  5-25
Dust outlet diameter(mm) vertical spindles Φ150mm Φ150mm Φ150mm
horizontal spindles Φ180mm Φ180mm Φ180mm
Overall machine dimensions (L×W×H) (mm)  4950×2120×2000  4250×2120×2000  4020×2120×2000
Weight(Tons approx)  7  6.5  6

Note:Any variation to the specification above mentioned will not be further notified since the product specification and designs keeps on changing all the time.”

M40 Outstanding character

  1. Special processing range, widely satisfied with the needs of greatness workpieces. The Max. Working width is 400mm, and the Max. thickness is 300mm.
  2. Each spindle with the diameter of 50mm. The out bearing on the horizontal spindles can increase the carrying capacity. The Max. outer diameter of cutting circle reach 230mm, this is good to improve the machining quality.
  3. The powerful feeding system consists of multiple sets of 180mm diameter upper feed rollers and multiple sets of bottom rollers. The feed system is fully powered to ensure a strong feeding capacity and the first set of bottom rollers are simultaneous lifting and lowering makes adjustment easier.”
  4. The working table adopted special alloy steel and also treated by vulcanize treatment . The hardness more than HRC60 degrees for the durability.
  5. The left and right spindles are designed to adopt double-desk working table.The axial adjustment range is 80mm. As it can hold two groups of cutter blocks, it is flexible for machining.
  6. The working thickness of top spindle and the working width of left spindle are adopt electric setting. Higher precision and easier to operate.
  7. Each feeding roller, side pressure wheel, front and rear pressure board of top spindle are pressed by pneumatic. The pressure can be adjusted and it is convenient to control.
  8. Motion adjustment is widely adopted pneumatic-locking, each spindle and the inter-lock with the electric system is for safety and simplify operations.
  9. For the 2nd bottom spindle, there is individual motor automatically to  lift the top pressure shoe, and the saw blade installed reaches the diameter of 300mm .The top pressure shoe which is controlled by pneumatic enlarged the working range as well.
  10. To assure powerful cutting, the spindles are with high-power motor and driven by synchronous belt.
  11. Inverter feed speed of 5-25m/min.
  12. Electric oil pump lubricates the working table in timing and ration (which can be adjusted) , centralized lubrication to moving parts by manual oil pump.
  13. Adopting PLC system to achieve the control of each spindle motor and location setting device.
  14. Moveable PLC screen , convenient for using.
  15. Adopting electric components from international class with steady quality.
  16. Pneumatic blower to ease the cleanness.

17. Sealed safety cover is for the protection against noise and dust, and it ishelpful for safe operation